Posted by Mike Ciavattieri on Tue, Feb 02, 2010 @ 08:16 PM
This is part two of my little 'mini-series' on the differences between the two most common real estate transaction radon gas testing methods. In part I, I addressed the primary similarity, that being accuracy. In this blog installment, I'll be sticking to differences. I'd like to cover a few pros and cons of each.
Cost - Advantage: Vial test
Most good quality kits cost the average inspector $20-$30. I can usually whittle the client cost down to the $50-$75 range. The machine test however, requires two trips or one (paid by me) trip for an assistant to pick up. Factoring in the machine's cost (upwards of $600) and the 'tie up' time, and you've looking at a typical $100-$150 per test.
Speed - Advantage: Machine test
We all know time is king in this business. Assuming a minimum 48-hour test interval, for the vial test results the typical turnaround is 5-7 business days from the start of placement. The machine? Wait 48 hours, show up, push button, done.
Simplicity - Advantage: Vial test
Don't discount simplicity as a potentially significant advantage. The vials require no calibration, don't care if the power is off or turned off, have no cords, don't need a back-up battery, and have no moving parts or 'down time'. If it 'can' go wrong with an electronic device, at some (most likely inopportune) time, it will.
"Tamper-proof" - ness - Advantage: Machine test
While no test is 100% tamper-proof, the machine test can be close. I have added temperature and relative humidity monitoring to my system to make testing virtually fool-proof. The vials require a small leap of faith that tampering has not occurred, however the test is not as easily fooled as it may seem.
So, like most other things in life, we see that there are plusses and minuses to the majority of A vs. B choices we are faced with every day. In the end, it all boils down to each individual clients specific needs and finances. As long as accuracy remains the same, no test method presents a clear advantage over the other.
I hope this little 'mini-series' on radon testing has shed a little light on this rapidly developing aspect of the real estate industry.
Posted by Mike Ciavattieri on Mon, Dec 14, 2009 @ 12:32 PM
Over my 10+ years as a Massachusetts Home Inspector, I (like many others in my profession) have seen a huge increase in the percentage of well-informed clients that are requesting radon gas testing as an additional service along with their home inspection. Several months ago I added continuous radon monitoring (CRM) - also loosely known as "the machine test" to my service arsenal, while continuing to offer the more economical liquid scintillation test - aka "the two small plastic vials".
I routinely get quizzical questions from clients ranging from ‘what is radon' , ‘why should I test for radon', ‘what's the difference between the two methods' , and my favorite - ‘why should I pay you when I can do it myself?' So, I thought I was time to devote a couple of blog installments on this rather important and somewhat mysterious subject. Here goes:
One common misconception about the two test methods is that the ‘machine test' is more accurate than the ‘vial test'. The bottom line is there is no difference in accuracy. Doesn't it make simple common sense just based on all of the potential implications? Think about it. The USEPA maintains strict protocols for placement and QA/QC for both types of devices. Upon close examination you'd find that for the most part, the protocols are nearly identical! So don't get sold into paying more based solely for accuracy - it simply isn't there. Analytical Organizations that provide vial test kits for testing must remain in compliance with the USEPA's strict QA/QC protocols in order for their devices to retain their product certifications. The same goes for Home Inspectors and the like providing continuous radon monitoring services.
Another common misconception is that there is some sort of ‘magic formula' for making a pre-determination about a property without actually testing for radon - there isn't. Brand new homes, old homes, stone foundations, concrete foundations, etc. - none are immune. No one in the neighborhood has radon? No matter - soil concentrations of radon can vary as much as 300 times over as little as 30ft of distance. The bottom line is that radon gas testing is the only way to make an accurate determination. I've had many an unsuspecting property and/or property owner be surprised by significantly elevated radon gas levels.
Which leads me to my final point: Accurate determinations require accurate testing. Yes, the average handyman can easily purchase the $30 hardware store kit. The truly difficult part comes with correctly following the placement protocols and the interpretation of the results. The average hardware store kit instructions at best fill up a few paragraphs on a single page - the USEPA's Protocol for ‘vial kits' takes up an entire page and half just for device placement! A lot of this critical information simply isn't on the average hardware store kit instructions! I've stumbled across many an incorrectly setup hardware kit over the past 10 years - and in almost all of those cases, those placement mistakes were almost certain to induce false negatives. Why risk it for another handful of dollars? Have a professional place your radon test kit.
In part II, I'll cover some of the pros and cons for each testing method. See you then...